ANANTAInnovations & Integrated Solutions
AISPL/SOLUTIONS/Architectural & Dynamic Facade Lighting
Topology Ref: AISPL-REF-LGT-01

Architectural & Dynamic Facade Lighting

High-density DALI-2 DT8, DMX-512/RDM pixel mapping, and stadium-grade flood control.

Architecture Spec Summary
TOPOLOGY:AISPL-REF-LGT-01
TIERS:3-Tier Deterministic
COMMISSIONING:Fieldbus Native
Sector Challenge & Vulnerability

The Operational Bottleneck

Architectural facade lighting installations face severe driver burnout caused by high inrush currents upon energisation, signal degradation over long fieldbus cable runs, and colour drift across multi-vendor fixtures.

Engineered Solution Topology

AISPL 3-Tier Hardware Response

Precision architectural illumination platforms supporting circadian white tuning, RGBW pixel mapping, and high-inrush stadium switching.

Section 2.0 — System Architecture

Deterministic 3-Tier Topology

Strict functional separation guarantees that field sensory inputs, high-speed switching logic, and cloud telemetry run without bus resource contention.

TIER 01INPUT & SENSING

Field Devices

  • ›Astronomical Solar Time Clock Scheduling Engines
  • ›DMX-512 / Art-Net Master Show Controllers
  • ›Exterior Ambient Lux Photocell Sensors (IP66)
TIER 02CONTROL & POWER

Core Actuators

  • ›DCS-200W-U Zero-Cross Inrush Suppression Contactors
  • ›Spectrum 5 Multi-Channel High-Resolution Dimming Engines
  • ›Optically Isolated DMX/RDM 4-Port Bi-Directional Line Repeaters
TIER 03GATEWAY & BMS

Supervisory Uplink

  • ›DALI-2 DT8 Colour Control Engine (IEC 62386-209)
  • ›Art-Net / sACN Ethernet-to-DMX Bridge with Web Configuration
  • ›Remote RDM Device Management Telemetry Loop
Key Architectural Benchmarks:
✓16-bit dimming resolution produces flicker-free fading down to 0.1%, eliminating stepped transitions on broadcast video.
✓Active zero-cross relay switching suppresses 100A driver inrush spikes, extending fixture lifetime beyond 50,000 hours.
✓Full RDM support enables remote fixture temperature diagnostics and fault localisation from the central control room.
Section 3.0 — Procurement Specification

Validated Bill of Materials (BOM)

TOPOLOGY BOM: AISPL-REF-LGT-01
#PART NUMBERDESCRIPTION & RATINGESTIMATED QUANTITYSUBSYSTEM ROLE
1SPECTRUM-55-Channel Multi-Spectral Dimming Unit, DALI DT8 / DMX-512 input, 16-bit PWM6 per facade sectionColour & Intensity Control
2DCS-200W-UArchitectural Contactor, 200W load capacity, zero-cross solid-state switching8 per lighting control panelInrush Protection & Load Energisation
3DB-9W-CC-60MinEmergency Constant Current LED Driver with internal battery pack4 per egress zoneArchitectural Emergency Back-up
Section 4.0 — Hardware Inventory

Included Hardware Modules

VIEW HARDWARE CATALOGUE
DCS-200W / DCS-200W-UDALI Controllers

DALI Controlled Contactor

Precision 16A inrush zero-voltage crossing switching contactor with native IEC 62386-101/102 bus isolation.

200VA continuous / 16A inrushInspect Specs
DB-9W-CC-60MinEmergency Drivers

Emergency LED Driver with Battery Backup

Constant-current architectural emergency driver with automatic DALI test compliance and LiFePO4 battery pack.

9W Emergency Output / 60 Min RuntimeInspect Specs
Spectrum 5 ControllerColor Controllers

5-Channel Tunable RGBW-WW LED Controller

High-frequency PWM driver engineered for Human Centric Lighting (HCL) and dynamic circadian rhythm synchronization.

5 x 5A Channels (25A Max)Inspect Specs
WISEGRID-4G-PROEdge Gateways & Telemetry

WiseGrid Industrial 4G Edge Gateway

Sub-millisecond telemetry bridge with zero-conduction galvanic protection

Request Architecture Engineering Review

Receive customized single-line diagrams, circuit calculations, and quantity takeoffs for AISPL-REF-LGT-01.

Request Solution BOM Quote