Energy Management & Power Quality

Seamless phase transfer, active power conditioning, and real-time telemetry.

Architecture Spec Summary

TOPOLOGY:AISPL-ARCH-PWR-01

TIERS:3-Tier Deterministic

COMMISSIONING:Fieldbus Native

Sector Challenge & Vulnerability

The Operational Bottleneck

Commercial facilities, data hubs, and critical manufacturing lines suffer from phase unbalance, neutral-to-ground noise, and grid voltage sags. Conventional mechanical transfer switches produce contact arcing and take 30–50ms to switch, triggering equipment resets and semiconductor stress.

Engineered Solution Topology

AISPL 3-Tier Hardware Response

Power monitoring, active harmonic conditioning, galvanic fault isolation and dual-source automatic transfer systems.

Section 2.0 — System Architecture

Deterministic 3-Tier Topology

Strict functional separation guarantees that field sensory inputs, high-speed switching logic, and cloud telemetry run without bus resource contention.

TIER 01INPUT & SENSING

Field Devices

›Three-Phase 415 VAC Grid Mains Feed
›Dedicated Auxiliary Generator Bus
›Rooftop PV Micro-Inverter Solar Input

TIER 02CONTROL & POWER

Core Actuators

›DSAPS-2S-100W-V2 Solid-State Phase Shifter (sub-10ms transfer)
›LCP-230V Active Earth Leakage Sensing Unit (<10mA trip)
›Active Harmonic Filtering & Soft-Start Zero-Cross Switching

TIER 03GATEWAY & BMS

Supervisory Uplink

›WiseGrid AnalytIQ High-Speed Edge Telemetry Node
›Galvanically Isolated MODBUS RTU Fieldbus Loop
›TLS 1.3 Secure MQTT Telemetry Broker to Facility SCADA

Key Architectural Benchmarks:

✓Sub-10ms phase transfer ensures continuity for switch-mode power supplies without triggering equipment resets.

✓3750 VAC galvanic dielectric withstand protecting all low-voltage control buses from 230V line transients.

✓True RMS current and harmonic analysis with onboard non-volatile telemetry spooling for zero data loss.

Section 3.0 — Procurement Specification

Validated Bill of Materials (BOM)

TOPOLOGY BOM: AISPL-ARCH-PWR-01

#	PART NUMBER	DESCRIPTION & RATING	ESTIMATED QUANTITY	SUBSYSTEM ROLE
1	DSAPS-2S-100W-V2	Dual Source Automatic Phase Shifter, 230VAC, 100W/channel, sub-10ms solid-state commutation	1 per critical distribution board	Primary/Secondary Phase Shifting
2	LCP-230V	Leakage Current Protector, 230VAC, 10mA threshold, DIN-rail mounting	1 per branch circuit	Galvanic Fault Isolation
3	DCS-200W-U	DALI-2 Contactor & Power Switch, 200W rating, DALI-2 DT7 / AU999 protocol	As required by sub-loads	Auxiliary Load Shedding
4	WG-ANALYTIQ-01	WiseGrid Edge Analytics Node, Ethernet + RS-485 MODBUS RTU, 16-bit ADC True-RMS	1 per electrical room	Supervisory Power Telemetry